top of page

Product Description

 

Handbrake only

 

you will need a Console specific SimRlink hub (buttons and progressive) or Openshifter (this uses a gear as handbrake (same as Logitech RS new shifter/handbrake and is not console  specific to use this handbrake 

 
How it works

MSB Pro+ handbrake operates as an extra controller . you have the option of Progressive using Right trigger input or B button X button or A button with this handbrake 

these options are controlled via the MSB module 

Switch down

is progressive mode giving a analog/progressive output giving more control than using a button

Switch up

is button mode and if you press the push button while in this mode it will cycle through modes 4 modes the handbrake saves the last mode you were in 

mode 1 B button (most other games)

mode 2 X button (need for speed games , crew games)

mode 3 A button (Car X , Forza Horizon , Motorsport )

mode 4 Forza mode (A button going on and off very fast used with Forza see below)

The Handbrake uses our SimRlink wireless technology to connect to the handbrake.

Includes SimRlink receiver + SimRlink handbrake the  SimRlink receiver plugs into the xbox USB port and communicates with the MSB SimRlink on the front of the handbrake 

You can purchase just the SimRlink receiver if you already have our MSB handbrake with SimRlink installed and this will give you access to use your clutch pedal and handbrake at the same time.

This only works with XBOX ONE / S / X consoles works with all wheels on the market for the console mentioned

SimRlink™ allows upgrades in future 

Our SimRlink™ receiver allows you to add to your racing experience in the future , we have support for ignition boxes (coming soon) , button boxes (coming soon) , our SR Sequenial shifter using L1 and R1 buttons 

https://simrtec.co.uk/sequential-shifter--simrlink-xbox--ps4--ps5--console-1128-p.asp

Add a button box at any time 

Our SimRlink ™ receiver allows you to connect a wireless button box, check out our push button engine start  ignition boxes  free postage when purchased with a handbrake just add to your cart 

With our SimRlink ™ receivers you have access to buttons  B , X  , A , Y 

Button box extra button support (£5 extra)

You can add extra button support which are used for the direction buttons up , down , left , right 

with wireless buttons boxes ( in development )

we have a 4 button box coming very soon that can switch between the direction buttons and standard buttons in one box 

we have extra support for the 4 direction buttons if you select the extra button support option at time of purchase 

 multiple button boxes can be connected and in future we will be making boxes with more buttons 

message us if your looking for some different than we have on the site

https://simrtec.co.uk/push-button-ignition-wireless--usb--button-box--simrlink---for-xbox--ps4--ps5-1299-p.asp

Games that we have tested and work with MSB Pro+ Progressive handbrake 

Crew 2 | Crew Motorfest (using X button mode ) no progressive handbrake in game

Need for speed Unbound (using X button mode ) no progressive handbrake in game

Dirt 2.0 (Tested for progressive input )

EA WRC 23 no setup needed if using B button mode , Progressive needs testing but pretty sure it will work 

Click here for video

 (video is pro version so instead of B button you will have right trigger show up)

New Product to help the Forza Horizon Throttle issue

You can now use this product to use your pedals as normal (while handbrake is active)


https://simrtec.co.uk/open-pedals-simrlink-g920--g29--g923--xbox--ps5-ps4-5893-p.asp

we have now corrected the lack of throttle pedal when handbrake is on , we use a Product called Open pedals (coming soon) this reads the throttle and brake values and sends them to the SimRlink receiver this will then replicate the throttle , this only works when the handbrake is on when it is off , your normal throttle will be restored , with this product you will also be able to display your throttle and brake values with displays / leds in future 

DIRT 5 (We need to make a video for this setup go to inputs go down to handbrake and select it , when asked pull the handbrake this will assign Left trigger input)

Forza mode added (not progressive only works in button mode using A button)

See below issue with Forza  we have added an extra mode to our MSB handbrake module 

when the 2nd switch is down this is progressive operation and does not work with Forza Horizon when the handbrake is in button mode

Switch up (A button used ) it will  handbrake is active (red led on) this is normal operation

in this mode if you press the push button it will switch the handbrake to Forza mode 

Forza mode

This will cut the handbrake in and out very fast (when handbrake is active) this allows the below issue with Forza to not be as affected by it so you can regain control of the car even if the handbrake is held on , where as before you would have no controls until the handbrake was let go. We will try to get videos up of the issue and our Forza mode so the differences can be seen.

The Forza Horizon issue


Forza Horizon 4 (works but we have noticed when using the handbrake all the wheel controls lock out until the handbrake is released and a pedal is pressed for example you loose steering (just stays centred in game) while handbrake is pulled , you loose throttle and also gear change  soon as you let go of the handbrake the wheel controls come back in.(after you press a pedal for example throttle)

we recommend when using the handbrake with this game to pull handbrake get sideways then let go and do it again if you need more handbrake to not leave it pulled back for very long as you will loose all steering and throttle

WRC Generations , 10 , 9 

Click here for video (video is pro version so instead of B button you will have right trigger show up)

CarX Drift Racing (tested for progressive input)

Click here for video (video is pro version so instead of B button you will have right trigger show up)

Grid Legends (need to fully test  )

Need for Speed heat (use X button mode)

Games that do not work

Forza motorsport 7

asseto corsa

assetto corsa competizione (no handbrake in game)

Please check the games you wish to play allow this option in set up if not on our working / not working list

to test the games you wish to play , plug in a external controller , set the handbrake button to B and see if you get the handbrake if you press B on external controller if you do our handbrake will work if not you either need to map it correctly to the external on controller on B button or it will not work on external controller.

 

Programmable braking point

 

Our new version MSB handbrake has a push button that you press to set your braking point from the braking point the MSB handbrake calculates the output from 100% (the chosen braking point) to 0 which is the rest position of the handbrake.

SimRlink MSB wireless Handbrake

£79.99Price
  • Dispatch time 

    All Products are built to order Order 

    Orders will be dispatched with in 5 to 7 days but this time could be less 

     

    We are now shipping to USA and Canada as well as the UK 

     

    No EU shipping (to many extra costs)

     

     

    Return & Refund Policy

    Thanks for shopping at SimRtec. If you are not entirely satisfied with your purchase, we're here to help. Returns You have 14  calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be packaged in suitable packaging so not to damage the item on return.

     

    Return for non working item

    We always try to resolve non working item issues via email , so if you get your item and can not get it working as you expect please email us simrtec@gmail.com , in the event we can not get the item working via email , and a part failure is causing the issue we try to send out parts ( to save sending the item back ) , but at this point if you wish to return the item you can , if we find we are at fault we will discuss options case by case basis for international returns, UK returns is not an issue just return item

    Refunds

    Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the refund to the method of payment used to purchase the item. within 7 working day , depending on your card issuer's policies.

     

    Shipping

     

    we will send you a returns label were you can go to post office with a QR code or print label (UK only)

bottom of page