Playstation 5 , PS5 MSB Pro+ wireless USB Plug and play handbrake using SimRlink™
Progressive and button mode
How it works
Video here
https://youtu.be/5jefFVzx950?si=b3sah6obxuBhiaV0
Our handbrake operates as an extra controller using Sony registered parts to connect to the PS5 console. with 4 modes , the modes are switched on the MSB module on handbrake
Progressive mode : switch down this outputs a variable value based on where the handbrake is through its travel so handbrake can be 35% , 50% , this gives more control of handbrake braking , this mode uses the left stick down input
Button mode : Switch up ,
When in this mode pressing the push button will cycle between O button , Square button and X button as button used when you pull the handbrake
this mode is on / off when red light is on handbrake is active , when red light is off handbrake is off
The Handbrake uses our SimRlink™ wireless technology to connect to the handbrake.
Included is a SimRlink™ receiver + SimRlink™ handbrake the SimRlink™ receiver plugs into the PS5 USB port and communicates with the MSB SimRlink™ on the front of the handbrake
Wireless use requires 3 x AAA battery's *not supplied* a usb cable is also supplied
Optional sequential shifter support (£5 extra )
Our SimRlink™ receiver now has added support for a sequential shifter if you choose this option
We now sell a sequential shifter, this is a PC shifter that we have converted to work with our SimRlink shifter box
https://simrtec.co.uk/sequential-shifter--simrlink-xbox--ps4--ps5--console-1128-p.asp
and if you want to make your own sequential shifter then all you need is our DIY box (same used with shifter above you only need 2 switches 1 for up shift one for down the rest is up to you
https://simrtec.co.uk/diy--simrlink-console-sequential-shifter-box-832-p.asp
Button box extra button support (£5 extra)
All our SimRLink boxes that come with our handbrakes support the basic 4 buttons square , X , O , triangle
with wireless buttons boxes ( in development )
we have extra support for the 4 direction buttons if you select the extra button support option at time of purchase
Whats included
SimRlink™ receiver
MSB Pro+ handbrake
2 X USB cables
1 X 3.5mm audio cable
Instructions are sent via email after dispatch
Compatibility
The MSB Pro+ handbrake works with the PS5 only and all wheels on the market including Logitech Pro wheel
Games that we have tested and work with MSB Pro+ wireless handbrake using SimRlink™
Need for speed Unbound (Use Square button mode)
Crew Motorfest (use Square button mode)
Grand Turismo 7 (button mode will not work with progressive mode)
GT Sport (button mode will not work progressive mode)
Dirt 2.0 | Button mode and Progressive mode
EA WRC 23 | Button mode and Progressive mode
DIRT 5 | Button mode and Progressive mode
WRC Generations , 10 , 9 | Button mode and Progressive mode
CarX Drift Racing | Use X button mode for no setup , Progressive mode
Need for speed heat (use Square button mode)
Need for speed unbound (use Square button mode)
Crew 2 (use Square button mode)
Games that do not work
Assetto corsa
ACC (no handbrake in game)
Project cars games
Programmable braking point
Our new version MSB handbrake has a push button that you press to set your braking point from the braking point the MSB handbrake calculates the output from 100% (the chosen braking point) to 0 which is the rest position of the handbrake.
Click here for video showing how it works
MSB Pro+ Progressive PS5 . Playstation 5 wireless Handbrake , USB, SimRlink™
Dispatch time
All Products are built to order Order
Orders will be dispatched with in 5 to 7 days but this time could be less
We are now shipping to USA and Canada as well as the UK
No EU shipping (to many extra costs)
Return & Refund Policy
Thanks for shopping at SimRtec. If you are not entirely satisfied with your purchase, we're here to help. Returns You have 14 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be packaged in suitable packaging so not to damage the item on return.
Return for non working item
We always try to resolve non working item issues via email , so if you get your item and can not get it working as you expect please email us simrtec@gmail.com , in the event we can not get the item working via email , and a part failure is causing the issue we try to send out parts ( to save sending the item back ) , but at this point if you wish to return the item you can , if we find we are at fault we will discuss options case by case basis for international returns, UK returns is not an issue just return item
Refunds
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the refund to the method of payment used to purchase the item. within 7 working day , depending on your card issuer's policies.
Shipping
we will send you a returns label were you can go to post office with a QR code or print label (UK only)
Universal Mount (£10)
This mount can be used for most sim rigs and wheel stands on the market designed to be fitted with a Logitech shifter bolted next to the handbrake
Playseat Evolution pro
if you have a gear shifter on the mount you will need the universal mount but if you don't have one you can use our M6 2 bolt option and this puts the handbrake where the shifter would be and is only (£3 extra)
Playseat Challange / Playseat with out pro mount + £3
if You already have a mount for your Playseat that fits Logitech shifter you can use the Universal mount if you don't you need to purchase a mount and then get the Universal mount.
or you can use this bar mount which mounts under the wheel then using PSC mount to mount the handbrake
MUST BE THIS MOUNT BELOW
Click here for UK Playseat R.A.C.00168 Amazon link
Click here for USA Amazon link for mount
our mount will only fit this product from amazon choose PSC mount for this option
To fit this mount you need to remove the bolt and springs to gain access to the allen key bolts (M8) a 13mm spanner can do this this unwind take springs / washers off then fit part to mount then put back together
M6 2 bolt mount (£3 extra)
This mount can be used with most standard gear shifter mounting plates that come with racing chairs from popular brands this mount has the same hole spacing as a Thrustmaster gear shifter , this mount can only be used with those if you do not have a shifter mounted on the standard plate
Additional Desk Clamp Mount + £12
The Clamp mount has a full closure of about 15mm so if what you are clamping to is less that 15mm thick we will need to add a 3D printed spacer so please message us to let us know you need this option if required